# Ethan Borochoff > Viewpoint student from Westlake Village, California. My projects mainly center around electrical engineering, while also incorporating some mechanical design. This is my resume and engineering portfolio. Project pages include the current status, design notes, CAD, photos, and videos. Expected performance and designs still in development are identified in the original project text. ## Portfolio and resume - [Ethan Borochoff — Engineering Portfolio](https://www.ethanborochoff.com/) — [Text version](https://www.ethanborochoff.com/reading/index.md) - [Ethan Borochoff — Resume](https://www.ethanborochoff.com/resume) — [Text version](https://www.ethanborochoff.com/reading/resume.md) ## Projects - [5 foot modular UAV](https://www.ethanborochoff.com/modular-uav): A 5 foot drone I designed to carry different payloads and test onboard compute and sensors. [Text version](https://www.ethanborochoff.com/reading/modular-uav.md). - [3 axis sensor ball](https://www.ethanborochoff.com/sensor-ball): A 3 axis sensor ball with four cameras, a rangefinder, and a 980nm laser designator. [Text version](https://www.ethanborochoff.com/reading/sensor-ball.md). - [OECT measurement device (Facchetti Lab)](https://www.ethanborochoff.com/facchetti-lab): My work on an OECT measurement device and LTSpice models at the Facchetti Lab. [Text version](https://www.ethanborochoff.com/reading/facchetti-lab.md). - [3 foot UAV test platform](https://www.ethanborochoff.com/flight-testbed): A low cost drone I rebuilt for payload integration and hardware validation before moving to the 5 foot UAV. [Text version](https://www.ethanborochoff.com/reading/flight-testbed.md). - [2 foot UAV test platform](https://www.ethanborochoff.com/early-uav): An earlier drone I used for hardware validation and systems integration. [Text version](https://www.ethanborochoff.com/reading/early-uav.md). - [3 foot drone transport UGV](https://www.ethanborochoff.com/ground-platform): A ground vehicle I am designing to carry the 5 foot UAV and smaller drones. [Text version](https://www.ethanborochoff.com/reading/ground-platform.md). - [8 µm handheld/helmet mounted thermal optic](https://www.ethanborochoff.com/compact-thermal): A small, lightweight thermal optic for handheld or helmet mounted use. [Text version](https://www.ethanborochoff.com/reading/compact-thermal.md). - [12 µm handheld/helmet mounted thermal optic](https://www.ethanborochoff.com/thermal-module): A 12 µm thermal optic with a design similar to my 8 µm version. [Text version](https://www.ethanborochoff.com/reading/thermal-module.md). - [Handheld/helmet mounted thermal optic](https://www.ethanborochoff.com/thermal-origins): My first handheld/helmet mounted thermal optic, built using an industrial thermal core. [Text version](https://www.ethanborochoff.com/reading/thermal-origins.md). - [Custom Gen II night vision tube](https://www.ethanborochoff.com/night-vision): My first night vision project beyond Gen I. [Text version](https://www.ethanborochoff.com/reading/night-vision.md). - [LoRa communication system](https://www.ethanborochoff.com/lora-telemetry): A LoRa system I built for command and telemetry between my unmanned vehicles. [Text version](https://www.ethanborochoff.com/reading/lora-telemetry.md). - [3 axis camera gimbal](https://www.ethanborochoff.com/camera-gimbal): A 3 axis gimbal for stabilizing a RunCam. [Text version](https://www.ethanborochoff.com/reading/camera-gimbal.md). - [1 axis thermal gimbal](https://www.ethanborochoff.com/thermal-gimbal): A 1 axis gimbal for stabilizing an industrial thermal core. [Text version](https://www.ethanborochoff.com/reading/thermal-gimbal.md). - [Rotary drop mechanism](https://www.ethanborochoff.com/rotary-deployment): A rotary mechanism for dropping sensors or communication relays in hard to reach areas. [Text version](https://www.ethanborochoff.com/reading/rotary-deployment.md). - [Dual servo pin dropper](https://www.ethanborochoff.com/pin-release): A fully functional dual servo pin dropper that I designed, built, and tested. [Text version](https://www.ethanborochoff.com/reading/pin-release.md). - [STM32H7VIT6 gimbal/sensor ball controller](https://www.ethanborochoff.com/gimbal-controller): A custom PCB and schematic for controlling my gimbal and sensor ball. [Text version](https://www.ethanborochoff.com/reading/gimbal-controller.md). - [Dual Jetson onboard computer](https://www.ethanborochoff.com/onboard-compute): A dual Jetson system I am developing to run MPC and transformer based flight models onboard small UAVs and UGVs. [Text version](https://www.ethanborochoff.com/reading/onboard-compute.md). ## Official profiles - [YouTube](https://www.youtube.com/@EthanBorochoff) - [Instagram](https://www.instagram.com/ethan_borochoff/) - [SoundCloud](https://soundcloud.com/ethanbhouse) ## Optional - [Complete text](https://www.ethanborochoff.com/llms-full.txt): All public page text and media links in one file. - [Sitemap](https://www.ethanborochoff.com/sitemap.xml): Canonical pages and original images.